PlotbeaconEast Devon District Council • 26/1845/DOC
Chimney repair details for Spout Hill
Spout Hill Kilmington Axminster EX13 7RW
Brick and mortar details are being given for chimney work at Spout Hill.
Nothing much would change for neighbours.
Written automatically by Plotbeacon.
- Status
- In progress
- Type
- other
Summary
The owner is sending brick and mortar details for chimney work at Spout Hill.
The details cover how the bricks will be laid and how the mortar will be made. Reclaimed red bricks are planned for the chimney rebuild. The work would affect the house itself.
The council will check these details before deciding whether they meet the earlier approval. This application concerns details, not new building work.
About this summary
What the council wrote is the official record. This summary was made automatically by Plotbeacon from the council's notice.
What the council wrote
Discharge of Condition for 26/1175/LBC: Condition 4a (brick, bedding and pointing mortar details)BeddingBedding mortar is to be mixed using a well graded washed grit sand (5mm down to 0.075mm) and St Astier NHL 5 at a ratio of 1:2 ? of binder to aggregate by volume.PointingThe pointing mortar is to use a well graded washed aggregate (the largest particle size should not exceed one-third of the joint width) mixed with St Astier NHL5 at a ratio of 1:2 ? of binder to aggregate by volume.Bricks for Chimney RebuildReclaimed semi-engineering red brindle brick laid in stretcher bond.